Fabrications / Splicing
Accessories
Item Number 043 |
Two Headed Nails - For all Labyrinth®, Base Seal and Split Waterstops |
Item Number 213 |
Field Splicing Iron - With 4-1/2" x 14" x 3/4" Bar |
Item Number 214 |
Field Splicing Iron - With 2" x 14" x 1" Bar |
Item Number 600 |
Hog Rings |
Item Number 601 |
Hog Ring Pliers |
Waterstop Fabrications
All GREENSTREAK® Waterstop material can easily be fabricated (spliced) in the field with a thermostatically controlled heating iron. However, it is our experience that field welded mitered fittings are seldom done correctly. For this reason, we recommend that fittings be fabricated at GREENSTREAK, leaving only straight butt joint splices for the field.
Fabrications will be furnished with 18" legs as measured along waterstop centerline. Quality assurance specifications for waterstop fabrications are available in three-part CSI format upon request. Dimensions shown in catalog are nominal. Industry standard tolerances apply.
Typical Factory Made Waterstop Fabrications
Flat "T"
Vertical "T"
Flat "X"
Vertical "L"
Flat "L"
Vertical "X"
Tie-Right Hog Ring Waterstop
- Quick and easy-tie to the rebar.
- Labor-saving features.
- Speeds installation.
- Improves proper installation.
- Stays in place during concrete placement.
- Cost effective.
Tie-Right makes it easier to do it right — easier and more convenient to fasten to rebar and promotes the most preferred method of waterstop installation, Hog Rings.
Recommend Tie-Right when specifications call for wire type waterstops or when you just want to save time, save money and promote the recommended placement of waterstop.
Style |
Size |
Ft/Roll |
Wt/Ft |
701F |
4" x 3/16" Rib |
100' |
.41 |
703F |
6" x 3/16" Rib |
100' |
.74 |
705F |
6" x 3/8" Rib |
50' |
1.20 |
709F |
9" x 3/8" Rib |
50' |
1.63 |
782F |
6" x 3/16" Rib |
100' |
.85 |
783F |
6" x 3/8" Rib |
50' |
1.39 |
Other profiles are available upon request |
|||

